User’s Guide
1-5
Writer: M. Silvetti Saved By: Marianne Silvetti Saved Date: 03/03/98 2:30 PM
Pages: 26 Words: 3913 Template: c:\msoffice\templates\normal.dot
File Name Ch1appa.doc Part Number 284986-002
Using USB Connectors
The base of the monitor has five Universal Serial Bus (USB)
connectors. Four of these connectors,
1
,
3
,
4
, and
5
, are for
connecting USB compatible Plug and Play devices such as a
keyboard, mouse, or video camera. USB connector
2
is used to
connect the USB signal cable to the computer. The USB signal
cable is included with the monitor.
Using BNC Connectors
A signal cable with BNC connectors may be used in place of the
15-pin signal cable. To connect two computers to the monitor, a
BNC connector may be used together with the 15-pin signal
cable. If you have separately purchased a signal cable with BNC
connectors, use the following instructions to connect the signal
cable to the monitor.
✎
Fault Management and Asset Control are not supported by the
monitor when BNC connectors are used.