manualshive.com logo in svg

Compaq Evo W8000, Справочник по аппаратуре

Поделиться
Скачать
Compaq Evo W8000 Скачать руководство пользователя страница 70

Hard Drive Installation 

Using a SCSI Cable

 

Selected models of the Evo Workstation W8000 ship with a 
multimode SCSI cable that supports Low Voltage Differential 
(LVD) or single-ended devices (UATA models do not have the SCSI 
cable). 

The Evo Workstation W8000 ships with a LVD cable that supports 
up to five SCSI devices. The cable accommodates up to three SCSI 
devices in the removable hard drive cage and two in the front drive 
bay area. Some Evo Workstation W8000 models ship with an 
internal SCSI drive installed in the front drive bay area. You can add 
additional high-performance SCSI drives using the external SCSI 
connector located on the rear panel of the workstation. 

 

Five-device SCSI cable with terminator 

 

The cable that shipped with your workstation may look different than 
the one illustrated (a five-device cable). 

 If you are installing a narrow SCSI device, you will need to attach a 
68-pin to a 50-pin SCSI adapter. 

 

For additional information about installing optional SCSI devices, 
refer to the documentation included with the device option kit, or 
contact your Compaq authorized dealer, reseller, or service provider. 

B-6

 

Compaq Evo Workstation W8000 Hardware Reference Guide

 

Содержание Evo W8000





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды