Hardware Upgrades
Removing the Memory Expansion Board
The memory modules are located on the memory expansion board.
To remove the memory expansion board in order to install additional
memory:
1. Shut down the operating system properly, then turn off the
workstation and any external devices. Disconnect the power cord
from the grounded AC outlet.
2. Remove the workstation access panel. See “Removing the
Workstation Access Panel” in this chapter.
3. Remove the metal shipping bracket that extends above the
memory expansion card. Return the screw to the side of the air
plenum located at the front of the workstation.
4. Locate the memory expansion board that is connected to the
system board.
Memory expansion board
Compaq Evo Workstation W8000 Hardware Reference Guide
2-7
