Compaq Armada 1500, Руководство пользователя

Страница: 25 / 115

2-4 Using Power Features
Writer: Lorize Fazio Saved by: Johnnie Abercrombie Saved date: 10/07/97 4:16 PM
Part Number: 284809-003 File name: Ch02.doc
Results of Suspend
When Suspend is initiated, the following occurs:
■
Beeps two times
NOTE:
If system beeps are turned off, beeps are not audible.
■
Screen blanks
■
Power/suspend light blinks
Exiting Suspend
Exit Suspend by pressing the suspend button once. When you exit
Suspend, the following occurs:
■
Beeps twice
■
Power/suspend light stops blinking and becomes steady
■
Returns your information to the screen right where you left
off. No information is lost.
IMPORTANT: The computer will not exit Suspend if it is in low-
battery condition and it is not connected to external power. In this
case, you must connect AC power. When AC power is connected,
press the suspend button once to return your information to the
screen.
IMPORTANT:
If the computer is in Suspend, and a low-battery
condition occurs, the computer automatically initiates Hibernation
(unless Hibernation has been disabled), saves your information to
the hard disk, and turns off the computer. When you turn the
computer back on after inserting a fully charged battery pack or
connecting external power, your information returns to the screen
at the point where Suspend was initiated. No information is lost.
Using Hibernation
Hibernation is a safeguard condition during which all information
in system memory is saved to the hard disk and power to the
computer is turned off. When you turn on the computer and
resume work, your information is returned to the screen exactly
where you left off. No information is lost.