Removal and Replacement Procedures
3-39
Compaq Confidential – Need to Know Required
Writer: Bruce Sullivan Project: Compaq Deskpro Workstation AP250 Maintenance and Service Guide Comments:
Part Number: 118133-001 File Name: d-ch3 Removal and Replacement Procedures.doc Last Saved On: 10/26/99 3:02 PM
6.
From the back of the chassis, push the I/O panel in towards the system
board and lift the I/O panel out.
Figure 3-33. Removing the I/O panel
To replace the I/O panel, reverse the above procedure.
Replacing the Lithium Battery
WARNING:
The system board contains a lithium-ion battery pack. There is a
risk of fire and chemical burn if the battery pack is handled improperly. Do not
disassemble, crush, puncture, short external contacts, dispose of the battery in
water or fire, or expose it to temperatures higher than 60ºC (140ºF).
CAUTION:
Static electricity can damage the electronic components of the
workstation. Before beginning these procedures, be sure you are discharged of
static electricity by briefly touching a grounded metal object.
NOTE:
Before replacing the battery, create a diagnostics diskette. Instructions for
creating and using the Compaq Diagnostic Diskette are located on the Compaq website at
www.compaq.com
NOTE:
When replacing a battery, use a Renata CR2032 or equivalent 3-volt lithium coin
cell battery.
Содержание AP250 - Deskpro Workstation - 128 MB RAM
Страница 6: ...6 Addendum to MSG 118133 001 Air Baffle Assembly ...
Страница 7: ...Compaq Deskpro Workstation AP250 Maintenance and Service Guide ...
Страница 194: ...158269 001 118133 001 ...
