Compaq AP250 - Deskpro Workstation - 128 MB RAM, Руководство по техническому обслуживанию и ремонту

Страница: 105 / 194

4-28 Compaq Deskpro Workstation AP250 Maintenance and Service Guide
Compaq Confidential – Need to Know Required
Writer: Bruce Sullivan Project: Compaq Deskpro Workstation AP250 Maintenance and Service Guide Comments:
Part Number: 118133-001 File Name: e-ch4 Diagnostic Tools.doc Last Saved On: 10/26/99 3:09 PM
To run TEST:
1. Restart the workstation from the diagnostics diskette you have created.
2. Press Enter to bypass the welcome screen.
3. Select Computer Checkup (TEST), then press Enter.
4. Select the option to view the device list. A list of installed hardware
devices is displayed.
5. Verify that TEST correctly detected the devices installed. If the list is
correct, select OK. The test option menu is displayed again. If the list is
incorrect, be sure that any new devices are installed properly.
NOTE: This utility may not detect non-Compaq devices.
6. Select one of the following from the TEST options menu:
Y
Quick Check Diagnostics
Y
Automatic Diagnostics
Y
Prompted Diagnostics
CAUTION: In the
Prompted Diagnostics option, if Attended Testing is selected,
the test itself may result in data loss. It is recommended that the user select
Unattended Testing.
IMPORTANT: When you run the TEST utility, be sure to record any error message
numbers.
7. Follow the instructions on the screen as the diagnostic tests are run on
the devices. When the testing is complete, the TEST option menu is
displayed again.
8. To exit TEST, press Esc until you see the Exit option, then press Enter.
Running View System Information (INSPECT)
NOTE: View System Information (INSPECT) will detect Compaq hardware. Devices from
other manufacturers may not be detected.
The View System Information (INSPECT) utility provides information about
the system after it has been configured, including:
■ System
■
Contents of the operating system startup files