manualshive.com logo in svg

Compaq 5500R - ProLiant - 256 MB RAM, Руководство по установке и настройке, Страница: 87 / 169

Поделиться
Скачать
Compaq 5500R - ProLiant - 256 MB RAM Скачать руководство пользователя страница 87

6-1

Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide

For use with Pentium II Xeon and Pentium III Xeon processor-based servers only

Writer: Michele Wray   Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide   Comments: 328470-002

File Name: G-CH06.DOC   Last Saved On: 2/8/99 11:27 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Chapter 6

Integrated Management Display

The Integrated Management Display (IMD) is an integrated LCD display panel
mounted on the front of the server. It is designed for customers requiring even
greater levels of uptime and improved serviceability. The LCD panel will
display information directly at the server to assist the user in diagnosing and
servicing the server without using a keyboard and monitor.

Integrated Management
Display Features

The features of the Integrated Management Display include:

■ 

Flexibility - The Integrated Management Display rotates to support both
tower and rack configurations.

■ 

Manageability - In an environment where every second counts, it is
important to have service and administrative information at your
fingertips. Typical information includes:

❏ 

POST (Power-ON Self-Test) messages

❏ 

User-defined administrative information

❏ 

POST error events

❏ 

System information

■ 

Ease of Use  - For enhanced server management, the Integrated
Management Display provides a 16x4 character display and four button
control panel to easily navigate through menus.

Содержание 5500R - ProLiant - 256 MB RAM










































































































































































Отзывы:

Нет отзывов