manualshive.com logo in svg

Compaq 5500R - ProLiant - 256 MB RAM, Руководство по установке и настройке, Страница: 13 / 169

Поделиться
Скачать
Compaq 5500R - ProLiant - 256 MB RAM Скачать руководство пользователя страница 13

xiii

Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide

For use with Pentium II Xeon and Pentium III Xeon processor-based servers only

Writer: Michele Wray   Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide   Comments: 328470-002

File Name: A-FRNT.DOC   Last Saved On: 2/8/99 11:33 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

WARNING:

     To reduce the risk of personal injury or damage to

the equipment, be sure that:

■ 

The leveling jacks are extended to the floor.

■ 

The full weight of the rack rests on the leveling jacks.

■ 

The stabilizing feet are attached to the rack if it is a single
rack installations.

■ 

The racks are coupled together in multiple rack installations.

■ 

A rack may become unstable if more than one component is
extended for any reason. Extend only one component at a
time.

This guide is designed to be used as step-by-step instructions for installation,
and as a reference for operation, troubleshooting, and future upgrades.

Getting Help

If you have a problem and have exhausted the information in this guide, you
can get further information and other help in the following locations.

Compaq Website

The Compaq Web Site has information on this product as well as the latest
drivers and Flash ROM images. You can access the Compaq Website by
logging on to the internet at 

http://www.compaq.com

.

Telephone Numbers

For the name of your nearest Compaq Authorized Reseller:

In the United States, call 1-800-345-1518
In Canada, call 1-800-263-5868

For Compaq technical support:
In the United States and Canada, call 1-800-386-2172
For Compaq technical support phone numbers outside the United States and
Canada, visit the Compaq Website at:

//www.compaq.com.

Содержание 5500R - ProLiant - 256 MB RAM










































































































































































Отзывы:

Нет отзывов