Compaq.com - Compaq Presario Maintenance and Service Guide - 4900, 5000, & 5100 Series
United States December 9, 2002
Maintenance and Service Guide
Compaq Presario 4900, 5000, & 5100 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
DISASSEMBLY
SEQUENCE
Electrostatic
discharge
Service
considerations
Preparation
for
disassembly
Serial number
Hood
Fax-modem
System board
bracket
Serial port
assembly
Mass storage
devices
System board
components
Power supply
Front bezel
Instant On
button board
Creativity
Action Center
REMOVAL & REPLACEMENT
Preparation for Disassembly
To prepare the computer for removal and replacement procedures, complete the following steps:
1
Remove any diskette, compact disc, or tape from the computer.
2
Turn off the computer and any peripheral devices that are connected to the
computer.
CAUTION:
The computer power switch should
be turned off before you disconnect any cables.
3
Disconnect the power cord from the electrical outlet, and then from the
computer.
4
Disconnect all peripheral device cables from the computer.
IMPORTANT:
During disassembly, label each cable as you remove
it. Be sure to note its position and routing.
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/4951/prep.html [12/9/2002 5:16:02 PM]