Compaq.com - Compaq Presario Maintenance and Service Guide - 4900, 5000, & 5100 Series
United States December 9, 2002
Maintenance and Service Guide
Compaq Presario 4900, 5000, & 5100 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the System Board Bracket,
continued
10
Slide the system board bracket back at an
angle, lining up the pins in the top and bottom
with the hinge opening, then pull the system
board bracket out of the chassis.
END OF SEQUENCE
To replace the system board bracket, reverse this
procedure.
CAUTION:
When replacing the system
board bracket, ensure the fingers of the
I/O bracket are properly aligned to
prevent bending the fingers. Bending
the bracket fingers may damage the
system board.
Return to section index
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/4951/bdbkt6.html [12/9/2002 5:16:28 PM]
