HP Array Configuration Utility 78
ArrayAccelerator =
Enable
|Disable
PreferredPath =
1
|2
HBA_WW_ID = WWN
ConnectionName = UserDefinedName
HostMode = Default | Windows | Windows(degrade | openVMS | Tru64 | Linux |
Solaris | Netware | HP | Windows Sp2 ; COMMENT: The Windows(degrade value
must be entered as written.
Script file options
Options in ACU script files are divided into the following categories:
•
Control category (on page
79
)
•
Controller category (on page
80
)
•
Array category (on page
83
)
•
Logical Drive category (on page
85
)
•
HBA category (on page
89
)
Each category has several scripting options, but you do not always need to assign values to every option.
ACU can use default values in some instances, while in other instances, a listed option might not be relevant
for a particular configuration or scripting mode.
The options for each category are listed in the following table and described in more detail in the remainder
of this section.
Category
Options
Description
Control
Action
Method
These options define the overall behavior of ACU when it
processes scripts and creates configurations. Control
options can occur only once in a script file and must be
listed first.
Controller
Controller
CacheState
ClearConfigurationWithDataLoss
DeleteLicenseKey
DPOEnable
DriveWriteCache
ElevatorSortEnable
ExpandPriority
IRPEnable
LicenseKey
MNPDelay
NoBatteryWriteCache
PreferredPathMode
QueueDepth
RaidArrayId
ReadCache
RebuildPriority
SurfaceScanDelay
SurfaceScanDelayExtended
SurfaceScanMode
WriteCache
Options in this category specify the controller that is to be
configured (or the controller that had its configuration
captured). Although the Controller option must begin this
section of the script, you can script other options in this
category in any order.
You can use one script file to configure all controllers in a
system, and you can configure the controllers identically
or individually. If you define each controller configuration
individually, enter the option values for one controller
and its arrays and logical drives before specifying the
option values for another controller.
