HP Array Configuration Utility 29
c.
Reboot the server.
5.
(Optional) To make newly created logical drives available for data storage, use the operating system
disk management tools to create partitions and format the drives.
Linux OS
1.
From any command prompt, enter one of the following:
o
For local mode, enter:
cpqauxe-nosmh
o
For remote mode, enter:
cpqacuxe-R
ACU launches in a browser (Mozilla Firefox).
2.
For a list of options, enter the following:
cpqacuxe-h
Launching ACU on a local server to configure a remote server
1.
On the local server (host), click
Start,
and then select
Programs>HP System Tools>HP Array
Configuration Utility>Setup HP Array Configuration Utility
.
The
Execution Mode
screen appears.
o
If
Remote Service Mode
is selected, continue with step 2.
o
If
Local Application Mode
is selected, select
Remote Service Mode
, reboot the server, and then
continue with step 2.
2.
On the remote server, open the browser.
3.
Enter the following text into the address field of the remote browser (where
servername
is the name or
IP address of the host):
http://servername:2301
The login screen for the System Management Homepage opens.
4.
Enter your login credentials:
o
If you are using version 2.0.0 or later of the System Management Homepage, use your operating
system user name and password.
o
If you are using an earlier version of the System Management Homepage, use your WBEM user
name and password.
The System Management Homepage opens.
For more information about the System Management Homepage, see the following:
o
The HP System Management Homepage web page
(
http://h18013.www1.hp.com/products/servers/management/agents/index.html
)
o
The
HP System Management Homepage Installation Guide
on the HP website
(
http://www.hp.com
)
5.
Click
Array Configuration Utility
on the left side of the screen.
ACU opens, scans the remote server, and detects controllers. This process can last up to 2 minutes.
When controller detection is complete, the controllers are available on the
Controller/Device
menu.
6.
Configure a controller ("
Configuring a controller
" on page
42
).
When configuration is complete, continue with the next step.
7.
To operate ACU on this server in Local Application mode, do the following:
