10
3
3
OPERATION
SWITCH
See Figure 5.
Your drill starts and stops by depressing and releasing the
switch trigger. Release the switch trigger to turn drill
OFF
.
VARIABLE SPEED
See Figure 5.
Your drill has a variable speed feature in the switch. The
switch delivers higher speed and torque with increased
trigger pressure. Speed is controlled by the amount of
switch trigger depression.
SWITCH LOCK
See Figure 5.
The switch trigger can be locked in the
OFF
position. This
feature helps reduce the possibility of accidental starting
when not in use. To lock the switch trigger, place the direction
of rotation selector in the center position.
REVERSIBLE
See Figure 5.
This tool is reversible. The direction of rotation is controlled
by a selector located above the switch trigger. With the drill
held in normal operating position, the direction of rotation
selector should be positioned to the left of the switch for
drilling. The drilling direction is reversed when the selector is
to the right of the switch. When the selector is in center
position, the switch trigger is locked.
CAUTION:
To prevent gear damage, always allow chuck
to come to a complete stop before changing the direction of
rotation.
SWITCH TRIGGER
FORWARD
Fig. 5
Fig. 6
RELEASE
(UNLOCK)
GRIP
(TIGHTEN)
KEYLESS
CHUCK
KEYLESS CHUCK
See Figure 6.
A keyless chuck has been provided with your drill to allow for
easy installation and removal of bits. As the name implies,
you can hand tighten or release drill bits in the chuck jaws.
Grasp and hold the collar of the chuck with one hand. Rotate
the chuck body with your other hand. The arrows on the
chuck indicate which direction to rotate the chuck body in
order to
GRIP
(tighten) or
RELEASE
(unlock) the drill bit.
WARNING:
Do not hold the chuck body with one
hand and use the power of the drill to tighten chuck
jaws on drill bits. Chuck body could slip in your hand
or your hand could slip and come in contact with
rotating drill bit. This could cause an accident resulting
in serious personal injury.
REVERSE
CENTER POSITION
(LOCK)
DIRECTION OF
ROTATION SELECTOR
(FORWARD / REVERSE)
BIT
CHUCK
COLLAR
To stop, release switch trigger and allow the chuck to come
to a complete stop.
WARNING:
Battery tools are always in operating
condition. Therefore, switch should always be locked
when not in use or when carrying at your side.
Fig. 4
DEPRESS LATCHES TO
RELEASE BATTERY PACK
LATCHES
BATTERY
PACK
BATTERY
PORT
Содержание 315.101860
Страница 16: ...16 NOTES...