Compal NTUC0, Руководство пользователя

Страница: 151 / 179

NTUC0 User Manual
After a low-battery warning, save your work immediately and then connect your
notebook to an electrical outlet. Hibernate Mode will begin automatically if the
battery runs completely out of power.
You will hear the low-battery warning when the battery charge is approximately 90
percent depleted. Your notebook will beep once, indicating approximately 10 to 15
minutes of battery operating time remain. If you do not connect your notebook to
alternative power source during that time, there will be a periodic beep. Your
notebook will automatically enter
Hibernate Mode
if battery charge reaches a
critically low level. For more information, see
7.1 Power Management
.
7.2.7 Removing the Battery
Before removing the battery, ensure your notebook is turned off.
Move the battery lock to switch to the right (Unlock position).
Slide and hold the battery to release latch.
Remove the battery.
7.2.8 Installing a Battery
Slide the battery into the bay.
Press it into place gently but firmly until the latch locks it into place.
Slide the battery lock to switch back to the locked position.
7.2.9 Storing a Battery
If storing your notebook for an extended period of time, please remove the battery.
Fully charge the battery before using your notebook again.
7.2.10 Working With Extra Battery Packs
If you spend a lot of time traveling or work without connecting your notebook to an
electrical outlet, it may be a good idea to carry the additional battery packs so you can
quickly replace a discharged battery and continue working.
7.2.11 Maximizing Battery Life
A battery can be recharged many times, but over time it will lose its ability to hold a
charge. To maximize the battery life:
7-10