Compal NTUC0, Руководство пользователя

Страница: 116 / 179

NTUC0 User Manual
(5) Hibernate Time Setting
This feature is for setting the time period before system will go into Hibernate mode.
Figure 21: Smart Watchdog – System Hibernate Screen
Operation Procedure
1. Click on “
Smart Watchdog
” icon under “
Smart Watchdog
” folder and dialog shown.
2. The Smart Watchdog dialog appears for further feature selection.
3. To active the monitoring webcam, users can select to set either the time period for
getting into “Standby” or “Hibernate”.
4. The time period before go into Standby can be set from 15 seconds to 5 minutes in
7-segment settings. Users can also set the time as “Never”.
5. The time period before go into Hibernate can be set from 1 minute to 10 minutes in
5-segment settings. Users can also set the time as “Never”.
4-20