Safety Instructions
iii
Power Cord & Adapter Warnings
•
See the installation instructions before connecting to the power supply.
•
Power cord sets for use in other countries must meet the requirements of that
country. Use the appropriate AC adapter and power cord for your locale.
•
If you use an extension cord with your AC adapter, ensure that the total ampere
rating of the products plugged into the extension cord does not exceed the ampere
rating of the extension cable.
•
When using your power cord, make sure to position it around objects so it will not
be cut or punctured.
•
When you disconnect a cable, pull on its connector on its strain relief loop, not on
the cable itself. As you pull out the connector, keep it evenly aligned to avoid
bending any connector pins. Also, before you connect a cable make sure both
connectors are correctly oriented and aligned.
•
Be sure that nothing rests on your AC adapter’s power cable and that the cable is
not located where it can be tripped over or stepped on.
•
Use only the AC adapters that are approved for use with this computer. Use of
another type of adapter may risk fire or explosion.
•
Before you connect the computer to a power source, ensure that the voltage rating
of the AC adapter matches that of the available power source.
−
115 V/60 Hz in most of North and South America and some Far Eastern
countries such as South Korea and Taiwan.
−
100 V/50 Hz in eastern Japan and 100 V/60Hz in western Japan.
−
230 V/50 Hz in most of Europe, the Middle East, and the Far East.
−
If you use an extension cable with your AC adapter, ensure that the total
ampere rating of the products plugged in to the extension cable does not
exceed the ampere rating of the extension cable.
•
Place the AC adapter in a ventilated area, such as a desktop or on the floor, when
you use it to run the computer or to charge the battery. Do not cover the AC adapter
with papers or other items that will reduce cooling; also, do not use the AC adapter
while it is inside a carrying case.
•
Disconnect power cords and cables by grasping the connector, not by pulling on
the cable itself. As you pull out the connector, keep it evenly aligned to avoid
bending any connector pins. Before you connect a cable, make sure both
connectors are correctly aligned.
•
To remove power from the computer, turn it off, remove the battery, and disconnect
the AC adapter from the electrical outlet.
Battery Pack Warnings
−
Do not carry a battery in your pocket, purse, or other container where metal objects
(such as car keys) could short-circuit the battery terminals. The resulting excessive
current flow can cause extremely high temperatures and may result in damage from
burns.
−
Danger of explosion may occur if battery is incorrectly replaced. Replace only with
the same or equivalent type battery recommended by the manufacturer.
Содержание JFT00
Страница 32: ......