13
AT THE END OF THE WORK
At the end of the work, and before carrying out any type of maintenance, perform the following
operations:
1.
Disconnect the plug from the mains socket
2.
Wrap it into the rear brackets
3.
Operate the handlebar adjustment lever (1) and set the column at rest
4.
Move the machine indoors, in an area where it cannot cause any damage to people or
surrounding property, but where it can also be protected against the accidental fall of objects. In
addition, do not park the machine in open places or on sloping floors
5.
disassemble the brush and clean it with a jet of water (to disassemble the brush, see
“DISASSEMBLING THE BRUSH” below)
WARNING: you are advised to always wear protective gloves, to avoid the risk
of serious injury to your hands
1
