INS_CNVETX1_REV– 06/10/13 PAGE 108
INSTALLATION AND OPERATION MANUAL
CNVETX1
TECH SUPPORT: 1.888.678.9427
encoder. The options are VBR, CBR and Constant_Q. The default is Constant_Q.
7. Enter the required bit rate parameters according to the rate control mode. For CBR enter the
Bit rate. For VBR enter the Average Bit rate and the Maximum Bit rate.
8. Enter the required Q parameters according to the rate control mode. Enter Q Max, Q Min, and
Q Initial for CBR. Enter Q Initial for Constant_Q. Enter Q Max, and Q Min for VBR.
9. Check the Use Server Defaults box if you want to use the default settings.
10. Select Save to save the settings.
MJPEG
You can set the MJPEG video CODEC setting of Q for the cameras. The range for the quality
adjustment is 1 to 99. The default setting is 75. At a higher setting, the bit rate will be higher.
Quality settings above 75 will result in higher bit rates with little gain in quality and are therefore
not recommended.
Figure 101: MJPEG CODEC
To set the MJPEG parameters:
1. In the CODEC drop down list select MJPEG.
2. In the Camera text-box enter the number of cameras per video source.
3. In the Video Standard drop down list, select PAL or NTSC.
