P a g e
|
13
Verify Windows IP Address Configuration
To re-enable automatic IP addressing on Windows Vista or Windows 7/8 click the
Start
button
, type
ncpa.cpl
then <
Enter
>; on Windows XP click
Start
, click
Run
, type
ncpa.cpl
then <
Enter
>.
Right click
on the connection that will
most likely be used to connect to dSPEC and choose
properties
. Ensure properties for IPv4 are set as follows:
•
General:
Obtain an IP Address automatically
is checked.
•
Alternate Configuration:
Automatic private IP address
is checked.
Click
Ok
on the open dialogs to save settings and dismiss the dialogs.
If you are not using automatic IP, configure the static IP appropriately. Make sure that Resyn and dSPEC are on the
same subnet. For additional information regarding assigning a static IP address, contact your ISP provider or review
IP
Address Tips
on page 4.
