Model 1 Classic
7
6
To add the next panel, lift one of the con-
nector rings and use it to capture the new
panel. Assemble the first layer of your loft
by following the pattern (see page 12-14).
Go slowly; it is not easy to replace a panel
after a layer is placed on top.
5
Check the joints. Every panel should be
locked in place by four connector rings.
Repeat this step for each panel as you
build your loft.
7
Slide another connector ring onto each
post, flat side down.
8
Lay platforms in place. Add the stairs. All
four corners of each stair should fit into
connector rings.
