EmulationEngine 11a/b/g User's Guide
080104
5-23
Group Name: Use a group name that helps you identify the devices that
will be tested (e.g., Warehouse, Stock_Room, Control_Tour, Shop_Floor,
etc.). It can be up to 12 characters (a...z, 0..9, and underscore (_)).
EE Address: This field shows the IP address of the EmulationEngine that
will run this scenario/test.
Number of Virtual Stations: Enter the number of virtual stations
(0...64) to be created in this scenario group. The default value is 5. If you
specify zero virtual stations in this dialog, you must use the Add vSTA to
Group dialog to add one or more virtual stations to this group. The Add
vSTA to Group dialog will use the default parameters you set in this group
definition.
Starting IP Address: If Sequential or Random is selected in the Address
Generation field, enter the starting IP address to be used for virtual
station IP address generation of newly created virtual stations in this
group. Successive virtual station IP addresses will be sequentially or
randomly generated from this base address.
