EmulationEngine 11a/b/g User's Guide
080104
4-1
CHAPTER 4: Initial Setup
For an Ethernet Port Connection
If the Command PC is attached to the Ethernet Port on the
EmulationEngine, complete the following steps to configure the Command
PC and access the EmulationEngine web-based user interface or
Command Line Interface (CLI):
1) Select Control Panel from the Start menu on the PC.
2) Double click on the Network Connections icon.
3) Right-click on the Local Area Connection icon for the Ethernet
controller that is connected to the EmulationEngine. Select Properties from
the right-click menu to display the Local Area Connection Properties
dialog.
4) Select/highlight Internet Protocol (TCP/IP).
5) Click the Properties button to display the Internet Protocol (TCP/IP)
Properties dialog.
