EmulationEngine 11a/b/g User's Guide
080104
5-21
per: This field defines what scheduling is based on (All vSTA = all virtual
stations, Groups = virtual stations within each group). If "All vSTA" is
selected, the Load Profile will run the next “run” number of virtual stations
at each scheduled iteration. If Group is selected, the Load Profile will run
the next “run” number of virtual stations from each group at each
scheduled iteration. The scheduled iteration is defined in the “every” field.
every: This field defines the number of seconds between each repetition
of the Load Profile: 1...3600 seconds (1 hour). When this time expires, the
next set of virtual stations (as defined in the run field) will be executed.
Select the Load Profile tab in the Load Profile/Monitors section of the page
to show the Load Profile graph. The Load Profile graph displays the Load
Profile setup: x-Axis = time, y-Axis = Groups or All vSTA depending on
the selection in the per field. The following illustration shows an example
Load Profile setup and graph:
After a delay of five seconds, the user interface will instruct the
EmulationEngine to run four virtual stations. Every five seconds
thereafter, the user interface will instruct the EmulationEngine to run
another four virtual stations until all virtual stations have been executed.
The graph depicts this scheduling scheme.
