EmulationEngine 11a/b/g User's Guide
080104
5-15
Total: This field shows the total number of virtual stations in each group.
Down: This field shows the total number of virtual stations in a group
that have not been configured in the EmulationEngine and are in a “down”
state.
Configured: This field shows the total number of virtual stations in each
group that have been configured in the EmulationEngine.
Ready: This field shows the total number of virtual stations in each group
that are ready (in the initialized state) to begin testing. These virtual
stations have been initialized in the EmulationEngine.
Authenticated: This field shows the total number of virtual stations in
each group that have authenticated with the System Under Test.
Associated: This field shows the total number of virtual stations in each
group that have associated with the System Under Test.
Running: This field shows the total number of virtual stations in each
group that are currently performing an operation defined by the scenario.
The operation that is being performed depends on whether the virtual
stations are configured for internal or external traffic generation.
Paused: This field shows the total number of virtual stations in each
group that have paused in their execution.
Terminated: This field shows the total number of virtual stations in each
group that have been terminated. These virtual stations must be reset
before they can be used again.
Done: This field shows the total number of virtual stations in each group
that have completed their run of an internal mode/ping test. This field will
not be incremented for virtual stations that are running an external mode
test or an internal mode test with infinite iterations.
Group Tabs: Each group defined in the scenario has its own tab. When
an individual group tab is selected, the table shows details of each virtual
station in the group.
GID: The global ID is a unique ID that is assigned by the EmulationEngine
to each virtual station in a scenario group. It is a unique ID across all
groups in the EmulationEngine.
IP Address: This field shows each virtual station's IP Address.
Run State: This column shows the current state of each virtual station in
the scenario group (i.e., Initializing, Authenticating, Authenticated,
Associating, etc.).
Iteration: The two numbers in this column show the current iteration of
the test that a virtual station is running or has completed and the number
of iterations that are configured for the virtual station (e.g., 5/10 = 5
iterations have been completed/10 iterations are to be run). These
numbers can be a value in the range zero (0) to 9999 or Infinite.
