CommScope NVG558 Скачать руководство пользователя страница 70

Страница: 70 / 92

Chapter 4: Tab and link elements defined

■

Allocation Mode:

The passthrough mode; one of:

■

Off

: disables passthrough.

■

Passthrough

: assigns the Gateway's public IP address to a single LAN-side client.

■

Default Server

: forwards externally-initiated traffic to a specific LAN-side client. Use

this if you have a publically-available server, or have a network application that uses

arbitrary port numbers (for example, certain online games).

The available fields in this page change, depending on the selected allocation mode.

Select

Passthrough

from the

Allocation Mode

pull-down menu, to assign and reuse the

public WAN IP on a LAN computer. Use DHCP for addressing the designated passthrough PC.

The acquired or configured WAN address is passed to DHCP, which will dynamically configure

a single-servable-address subnet. This dynamic subnet configuration is based on the local

and remote WAN address and subnet mask.

IP Passthrough mode

The following fields are available in IP Passthrough mode.

■

Passthrough Mode:

The method used to assign the WAN IP address to the selected LAN

client:

■

DHCPS-dynamic

: the Gateway assigns its WAN IP address to the first LAN client that

requests a DHCP lease. It may be helpful, after the gateway has obtained a WAN

IP address, to cycle the desired LAN client's interface or reboot it. On disabling this

feature, you should reboot the LAN client.

■

DHCPS-fixed

: the Gateway assigns its WAN IP address to a specific LAN client. It

may be helpful, after the gateway has obtained a WAN IP address, to cycle the LAN

client's interface or reboot it. On disabling this feature, you should reboot the LAN

client.

■

Manual

: a LAN client must be manually configured with the gateway's assigned

WAN IP address and gateway information.

■

Passthrough Fixed MAC Address:

When Passthrough Mode is DHCPS-fixed, this is the

MAC of the selected LAN client.

NVG558 4G-LTE Gateway User Manual STANDARD Revision x.1

Содержание NVG558





























































































Результаты поиска

Содержание NVG558

Отзывы:

Похожие инструкции для NVG558

Бренды по названию

Популярные бренды

CommScope NVG558, Руководство пользователя

Результаты поиска

Содержание NVG558

Отзывы:

Похожие инструкции для NVG558

Бренды по названию

Популярные бренды