Chapter 4: Tab and link elements defined
Warning:
Enabling remote access allows anyone who knows or can determine the
password, port ID, and URL (address) of the device to view any configuration settings
or change the operation of the device.
If remote access is not currently enabled, the Remote Access page allows configuration and
enabling.
■
Username:
The user ID required to log in remotely.
■
Password:
The password used for remote access.
■
Port:
The port number used for remote access. Use a port in the range 49152 to 65535.
■
User Inactivity Timeout:
The Gateway disconnects remote access after the specified
time expires with no activity.
■
Feature Duration:
The amount of time the Gateway allows remote access.
■
Permissions:
Select
Read-Write
or
Read-Only
.
■
URL:
The URL required for remote access to the Gateway.
■
Enable:
Click to enable remote access. When enabled, the button changes to
Disable
.
Access List
■
Source IP Address:
A range of IP addresses. If entered, the Gateway restricts access to
devices within that address range. You can configure multiple ranges, if needed.
To restrict to a single IP address, enter the same address in both boxes.
■
Add:
Click to add the configured range to the table.
The table shows configured address ranges. To delete a range, click the
Delete
button on
that row.
NVG558 4G-LTE Gateway User Manual STANDARD Revision x.1
34
