TECP-90-702 • Issue 4 • April 2017
Page 5
© 2017, ADC Telecommunications, Inc.
3
MOUNTING THE FRAME ON A CONCRETE SURFACE
To mount the frame on a concrete surface, use the following procedure.
1. Determine the frame location and ensure that the front and rear aisles at that location meet
the recommended minimum widths shown in
.
Figure 3. Determining Frame Location
2. Place the isolation pad on the concrete floor at the location just chosen, and use it as a
template to mark the concrete for the four mounting holes as shown in
. If optional
FOTSP will also be installed, mark the location for the FOTSP, also, as shown.
Figure 4. Marking Concrete
Note: Storage spools may loosen during shipment. Check storage spools for looseness.
Tighten spool cover screws if spools are loose.
249
8
9-A
REAR AISLE
(3-FEET
RECOMMENDED
MINIMUM)
FRONT AISLE
(4-FEET
RECOMMENDED
MINIMUM)
25272-A
MARK HOLE
S
AND CUTOUT
ON TEMPLATE
PENCIL
FOT
S
P (OPTIONAL)
LOCATION
