3.4
Insert the adapter with the clip from inside of the box. The clip
must fully engage. To release the adapters, press the small brass clips
inwards using a small screwdriver.
3.3
Break out the slots at the bottom of the box using a screwdriver.
Note:
Apply the screw driver at the side of the windows, not at the top.
4 Wall mounting
2
3.2
To release the cassette, push the hook (in the middle of the
cassette) to the right side and push the splice cassette upwards. The
cassette will lock in place at an angle of approximately 90° degrees.
4.1
The box can be mounted on to a wall (3x mounting holes) or
on to the supplied wall mounting plate with an additional strain relief for
cables.
4.2
Place the base plate at the required position, drill the required
3 holes (drill size Ø 5 mm), insert the wall plugs and fasten the base
plate to the wall.
