4
5.3 Fibers coming from the bottom entry of the box are routed to the
splice cassette through a channel on the left side. 900µm pigtails are
routed to the splice cassette on the right side. After closing the splice
cassette, the fibers are laid into the cassette.
4.9
Bottom cable entrance. Secure the cable with tie wrap at the
marked position. The tie wrap should only be slightly tightened to avoid
micro bends in the fiber.
5.1
Remove all the plugs from the adapters
5.4
Remove the second splice holder before inserting the splices.
B
Incoming cable with a diameter Ø 3 - 6.5 mm
Tie
Inner tube
4.8
Top cable entrance. Secure the cable with tie wrap at the
marked position. The tie wrap should only be slightly tightened to avoid
micro bends in the fiber.
Tie
Inner tube
5 Fiber management
5.2
Plug in all the 900µ pigtails. Use the fiber holder when more
than 12 900µ pigtails are used. One slot can hold up to 4 fibers
(marked position).
Incoming
900µm pigtails
5.5
Crimp splice holder can be inserted.
