background image

ADCP-90-516 • Rev B • April 2019

Page 2

© 2019, CommScope, Inc.

INTRODUCTION

CommScope FL2000 Storage Panels provide fiber storage for small to medium-sized fiber
networks and customer premises applications and are available in four versions. The storage
panels are available in a variety of storage capacities. The method of storage in the panel
determines the type of panel; Deck storage, Disk storage, Tray storage, or Horizontal
management panel.

Revision History

Trademark Information

CommScope and CommScope (logo) are trademarks of CommScope, Inc.

Related Publications

Listed below are related manuals and their document numbers. Copies of these documents can
be ordered online at

 http://www.commscope.com/SupportCenter

FL2000 System Planning and Application Guide

ADCP-90-209

FL2000 Termination Panel Installation Instructions

ADCP-90-213

FL2000 Splice Panel Installation Instructions

ADCP-90-224

FL2000 Termination/Splice Panels USer Manual

ADCP-90-522

Admonishments

Important safety admonishments are used throughout this manual to warn of possible hazards to
persons or equipment. An admonishment identifies a possible hazard and then explains what
may happen if the hazard is not avoided. The admonishments — in the form of Dangers,
Warnings, and Cautions — must be followed at all times. These warnings are flagged by use of
the triangular alert icon (seen below), and are listed in descending order of severity of injury or
damage and likelihood of occurrence.

ISSUE

DATE

REASON FOR CHANGE

Issue 1

02/1996

Original

Issue 2

02/2001

Add storage options and update mounting options

Issue 3

08/2003

Update storage lengths and add Horizontal 

Management

 panel

Rev B

April 2019

Change to CommScope format and contact information.

Title/Description

Document Number

Danger: 

Danger is used to indicate the presence of a hazard that 

will

 cause severe personal

injury, death, or substantial property damage if the hazard is not avoided.

Содержание FL2000 Storage Panel





















Отзывы: