CommScope Era M0201AKB_uc, Руководство по установке

Страница: 17 / 60

M0201AKB_uc CommScope Era
™
High Power Carrier Access Point Installation Guide — Preliminary
© January 2019 CommScope, Inc. Page 13
CAP H Overview
OCTIS Kits
All CAP H units include one OCTIS 1 Kit for the primary interface to a Classic CAN or TEN that CAP H plugs into
the CAP H Optical Port 1. You can order an additional OCTIS Kit, which would allow you to cascade two
CAP Hs via Optical Port 2, or to attach an auxiliary Ethernet device via the AUX Port.
Table 4 identifies the
OCTIS Kit options.
Table 4. CAP H OCTIS Kits
Kit Name
CommScope
PN
Description
Optical OCTIS Kit 7770612 Use as follows:
• Optical Port 1—to connect the CAP H to a Classic
CAN or TEN.
• Optical Port 2—to cascade a second CAP H.
• Ships with the following grommets:
– 6mm nominal diameter for use with cables
with OD range from 4.8-5.8
– 7mm nominal diameter for use with cables
with OD range from 5.8-6.8
– 8mm nominal diameter for use with cables
with OD range from 6.8-7.8
Ethernet OCTIS Kit 7760652 Use to attach an auxiliary Ethernet device.
Fiber/Cable
Protective Kit f. OCTIS 7823597 Use to protect fibers or cables; is 2m (78.7”) long.
1 OCTIS is a trademark of RADIALL.