CommScope Era M0201AKB_uc, Руководство по установке

Страница: 9 / 60

M0201AKB_uc CommScope Era
™
High Power Carrier Access Point Installation Guide — Preliminary
© January 2019 CommScope, Inc. Page 5
CAP H Overview
CAP H O
VERVIEW
This installation guide describes the High Power Carrier Access Point (CAP H), which interfaces with a Classic
CAN or TEN via an optical link. This allows the CAP H to provide data over Single-Mode Fiber (SMF), or
Multi-Mode Fiber (MMF). Power for a CAP H is provided over internal AC/DC (AC version) or DC (DC version).
On the downlink, the CAP H converts data arriving at the CAP H to analog signals and sends them to the
Antenna port. On the uplink, received signals are digitized and serialized into data streams, which are sent
back to the Classic CAN or TEN.
Figure 1 on page 5 shows how a CAP H can be deployed in an Era system.
e-POI
Classic
CAN
Node B
TEN
Fiber
CAP H
CAP H CAP H
CAP H
CAP H
CAP H CAP H
Cat6A Ethernet
Figure 1. CAP H in an Era System
The CAP H
•
is actively cooled and operates within the range of:
–
-33 °C to +50 °C
–
-27 °F to +122 °F
•
is rated for indoor and outdoor installations (IP66 and IP67)
•
Typical power consumption (4 band Units, exemplary):
–
450 W (room temperature, idle)
–
990 W (maximum temperature, fully loaded).