(Continued from page 4)
(continued on page 6)
2.
Attach top arm with welding (Item 6) to top bracket plate (Item 8) using M16 carriage bolt (Item 2), flat washer, lock washer and
M16 nut (Items 3, 4 & 5). Hand tighten them on 2 places.
Attach middle pipe mount (Item 15) to middle bracket plate (Item 8) using M16 carriage bolt (Item 2), flat washer, lock washer
and M16 nut (Items 3, 4 & 5). Hand tighten them on 2 places.
The top arm with welding (Item 6) won't be installed if the antenna is 0 deg downtilt.
See 0 degree tilt view as illustrated on sheet 10.
Mount Assembly, Top
0 DEGREE TILT VIEW
BSAMNT-SBS-2-3 KIT
Mount Assembly, Middle
15
8
6
8
2
5
5
4
3
3
4
4
3
3
4
5
5
2
639848
Page 5 of 13
www.commscope.com
© 2019 CommScope, Inc. All rights reserved.
Visit our website at www.commscope.com or contact your local CommScope representative or BusinessPartner for more information.
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. 639848 E (08/19)
