manualshive.com logo in svg

CommScope 260103821, Руководство по установке

Поделиться
Скачать
CommScope 260103821 Скачать руководство пользователя страница 21

Page 21 of 37

© 2021 CommScope, Inc. All Rights Reserved

6 

Cable bonding and grounding

6.1 

For cable with shielding, remove a section of the outer sheath 180⁰ around the cable by 

1.0”

 in length measured  

 

from the end of the outer sheath in order to expose cable shielding. See photo 82.

  

    

 

 

                  

Photo 82

6.2 

For grounding, press ground bar into slot in closure.

6.3 

If using Inline configuration, install inline ground bar and secure with bolt. See photo 83.

 

 

 

 

 

 

 

        

Photo 83

6.4 

External ground connection is to be placed in designated location.

6.5 

The ground wire is to be secured using the same bolt that is used to secure the cable retention assembly or    

 

secured with bolt. See photo 84.

   

Caution: Do not use braided or stranded ground wire when installing a ground through a port on the Mini-OTE 

300 closure. A solid ground wire is required to prevent a leak path and make a proper seal.

 

 

     

 

 

 

 

 

 

         

Photo 84

Содержание 260103821






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды