Commercial Electric TPAR2-PC-4K-BZ, Инструкция по использованию и уходу

Страница: 7 / 13

INSTALLATION (CONTINUED)
5
MAKE THE ELECTRICAL
CONNECTIONS
BB
C
☐
☐
If necessary, strip 3/8" of insulation
from junction box and lighting fixture
wires (fig 10). Connect wires by twisting
the exposed wires together and using
the wire nuts (BB). Ensure no loose
wires.
Connect lighting fixture black wire to
junction box black wire (line), lighting
fixture white wire to junction box white
wire (common), the junction box ground
wire to the green lighting fixture ground
wire, which is attached to the mounting
plate (C)
(fig 9).
Black (Line)
White
(Common)
Green (Ground)
Junction Box
Non-Dimming Wiring Diagram
TIP:
Hold stripped ends near each other and
align any frayed strands (do not twist wires).
Push the wires into wire nut (BB) and use
your fingers to twist the wire nut clockwise
until tight. Check for tightness by pulling
wires.
7
HOMEDEPOT.com
Please contact 1-844-584-3776 for further assistance.