Commercial Electric TPAR2-PC-4K-BZ, Инструкция по использованию и уходу

Страница: 8 / 13

(fig 10).
(fig 11).
(fig 12).
8
INSTALLATION (CONTINUED)
6
MOUNT THE LIGHT
FIXTURE
☐
Verify the fixture is flush with the wall.
☐
Once wiring is complete, align the
mounting screw hole in the light
fixture with the mounting screw hole
in the mounting plate bracket (C).
☐
Tighten the mounting plate screw (B)
until the fixture (A) is firmly secured
against the wall or eave.
7
CAULK AROUND THE
LIGHT FIXTURE
8
INSTALL BULBS AND
AIM THE LAMP HEADS
☐
After fixture is securely mounted, install
two PAR halogen or LED bulbs (sold
separately) into the lamp heads.
☐
Loosen the thumb screw on each lamp
head to allow rotation for aiming each
lamp head. Once aimed, tighten the
screws on each lamp head to fix the
desired angle.
☐
From the breaker and switch, turn
power back ON to the light fixture to
verify light fixture illuminates.
WARNING: Risk of fire. Keep the lamp heads
at least 12 in. from combustible materials.
CAUTION: Keep lamp heads 30° below
horizontal to prevent water damage and
electrical shock.
IMPORTANT INFORMATION: PAR Halogen/LED
bulbs are sold separately. If you need to
purchase please contact your retail store.
A
C
A
B
NOTICE: Failure to properly caulk around the
back face of the light fixture and mounting surface
could lead to water damage and is not covered under
warranty.
NOTE: When attaching the light fixture (A) to a
surface mount junction box, caulk between the
mounting plate and junction box.
☐
Caulk around the back face of the light fixture
shown in (fig 12) with silicone sealant
(not included).