Commercial Electric TPAR2-PC-4K-BZ, Инструкция по использованию и уходу

Страница: 10 / 13

CARE AND CLEANING
☐
appearance, clean the light fixture with clear water and a soft, damp cloth only.
☐
Do not use abrasive cleaners or cleaners that contain alcohol. Do not apply paints,
solvents, or any other chemicals on this light fixture. They could cause a premature
deterioration of the finish and may void the warranty.
☐
Do not spray the light fixture with a hose or power washer.
TROUBLESHOOTING
10
Problem Possible Cause
Solution
Light does not
turn ON
No power to the fixture
Check if circuit breaker is tripped
Confirm wall switch is On Verify
wiring to fixture is correct (turn
Fixture is sensing daylight
Cover photocell. Wait several
seconds until fixture turns ON.
Light cycles
ON and OFF
continuously
Photocell light sensor is
sensing reflected light
Relocate light fixture to a location
where there is no reflected light.
OR Cover photocell light sensor and
use the wall switch to turn the light
fixture ON and OFF
OR Cover the photocell light sensor
and use the wall switch to turn the
light fixture ON and OFF
Light stays ON
Photocell light sensor is in
a shaded area
Shine a flashlight into the light sensor
and wait a couple minutes. If the light
turns OFF, the fixture should be
moved to a location with enough light
in the daylight hours for the light
sensor to work.
Photocell light sensor is faulty
a flashlight is shined on the light
sensor for a few minutes, then
the sensor may be faulty. Please
contact customer service.