background image

 

5 HOMEDEPOT.com

 

 

Please contact 1-844-548-3776 for further assistance.

Preparing for Installation

Review this information to ensure a successful 
installation:

 

Install the light 12

30 ft. above the ground.

 

When mounting the fixture, ensure the 
photocell is in an area that receives daylight 
and is not too close to reflective surfaces in 
order to ensure successful Dusk-to-Dawn 
operation.

 

When installing two fixtures on one switch, 
make sure the switch is rated for at least a 1A 
inductive load.

 

Do NOT wire to a dimming switch.

 

When mounting to a wall, make sure the 
fixture is 7 in. on center away from an eave 
and 13 in. on center away from the inside 
corner of the exterior wall.

CAUTION:

 Do not try to rotate the photocell receptacle 

on top of the fixture as it may twist the wiring. 

NOTE:

 Make sure the photocell is locked on the receptor. 

Do not over rotate after it is locked.

Wall Mount

Extension Arm Mount

7 in. 13 in.

13 in.

Installation

Turning off the electricity

 

Verify the wall switch is in the OFF position.

 

Turn off power at the circuit breaker that 
supplies power to the outlet box you are 
working on.

 

For screw-in type fuses unscrew the fuse 
that supplies power to the outlet box you are 
working on.

Содержание 1003 953 046












Отзывы: