10
Troubleshooting
Problem
Possible Cause
Solution
The light does not
turn ON.
There is no power to
the fixture.
□
Check if circuit breaker is tripped.
□
Confirm wall switch is ON. Verify wiring to the fixture is correct
(turn power OFF to fixture beforehand).
The fixture senses
daylight.
Cover the photocell. Wait several seconds until the fixture turns
ON.
The light cycles
ON and OFF
continuously.
The photocell light
sensor is sensing
reflected light.
Relocate the light fixture to a location where there is no reflected
light.
The light flickers.
The light fixture is
wired through a
dimmer switch.
Do not use a dimmer switch to control the light fixture. Replace the
dimmer with a standard ON/OFF switch.
The light stays
ON.
The light sensor is in a
shaded area.
Shine a flashlight into the light sensor and wait up to a minute. If
the light turns OFF, the fixture should be moved to a location with
enough light in the daylight hours for the light sensor to work.
The light sensor is
faulty.
If the light does not turn OFF when a flashlight is shined on the
light sensor for up to a minute, then the sensor may be faulty.
Please contact customer service.
NOTE:
The photocell (B) may have a short delay in order to reduce its sensitivity to sudden light changes. When testing, shine a light/
cover the photocell for up to a minute to check if the fixture functions properly.
