10
■
Power Saver—The fan will switch off whenever the
compressor turns off in response to the set temperature.
When the compressor cycles back on, the fan will return
to the set fan speed.
Fan Speed
1.
Press FAN SPEED until you see the indicator light come on
for the setting you desire.
2.
Choose Auto, High, Mid or Low.
When Auto is selected, the fan speed will change
automatically as the temperature in the room changes.
■
7º or more above the set temperature will use High.
■
4º to 7º above the set temperature will use Mid.
■
4º or below the set temperature will use Low.
Temperature
Press the TEMP plus pad. Display shows the Temperature control
setting. Each time you press or hold the plus button, the
temperature will increase 1º until it reaches 88°F (31ºC).
Press the TEMP minus pad. Display shows the Temperature
control setting. Each time you press or hold the minus button, the
temperature will decrease 1º until it reaches 66°F (19ºC).
To change the temperature display from ºF to ºC
Press both pads at once to switch the display from ºF to ºC.
Timer Delay
To set Timer for a 0.5- to 24-hour delay before air
conditioner turns Off (air conditioner must be On):
1.
Press TIMER. Timer indicator light will remain on. Display will
show remaining hours before air conditioner will turn off.
2.
Press the plus or minus pad to change the delay time from
0.5 to 24 hours.
3.
Press TIMER again or wait 10 seconds. Timer indicator light
will remain on. Display will show remaining hours before air
conditioner will turn off.
4.
To turn Timer off, press TIMER again, or press POWER to turn
off the air conditioner.
To set Timer to turn on air conditioner, keeping previous
settings:
1.
Turn off air conditioner.
2.
Press TIMER. Timer indicator light will flash. Display will show
remaining hours before air conditioner will turn off.
3.
Press the plus or minus button to change delay time from
0.5 to 24 hours.
4.
Press TIMER again or wait 10 seconds. Timer indicator light
will remain on.
To set the Timer delay for a 0.5- to 24-hour delay until the
air conditioner turns on, changing the previous settings:
1.
Turn on air conditioner.
2.
Adjust Mode to Cool, Heat (on some models), Fan Only, or
Power Saver.
3.
Adjust Fan Speed to Auto, High, Mid or Low.
4.
Adjust temperature between 66°F (19ºC) and 88°F (31ºC).
5.
Wait 3 seconds before turning off air conditioner.
6.
Press TIMER. Timer indicator light will flash. Display will show
remaining hours before air conditioner will turn on.
7.
Press the plus or minus button to change delay time from
0.5 to 24 hours.
8.
Press TIMER again or wait 10 seconds. Timer indicator light
will remain on. Display will show current room temperature.