GE 300
5. Configuration CCT 800
3.2/0617
21
Start-up of a networked system
In networked systems each Intercom Server housing must be advised a unique number (server ID).
Setting the server ID in CCT 800
Configuration CCT 800
To set the server ID of a new added Intercom Server in CCT 800, follow the instructions below:
1. Go to:
Intercom Server > Cards
The following dialogue appears:
Dialogue “New Intercom Server”
2. In the server area, right-click and select
“add Intercom Server”.
3. Activate the radio button
GE 300
.
4. In the field
Server-ID
, enter the desired server ID and click on
OK
. Repeat this steps for all further
housings.
5.
Optional:
In the field
Description
, enter a description for the housing.
6. Go to:
Menu
Intercom Server > Send
7. Send the configuration to the Intercom Server. Further information about the sending process can
be found in the manual “
Intercom Server Configuration
”.
