10
1) Changing Resident Password
1. Hold “Residence Number” and “Key button for 2 seconds and release
when LCD stops blinking.
2. Enter “Current password“
3. Hold “Key button for 2 seconds and release when LCD stops blinking.
4. Enter “New Password“ with 4 digits on Multi Entry Panel displaying
“NEW PW : “message.
5. Hold “Key button for 2 seconds and release when LCD stops blinking.
6. Repeat “New password“ to confirm it.
7. Hold “Key “ button for 2 seconds and release when LCD stops blinking.
2) Changing Building Password (default password : “4321”)
1. Enter “9900“ and then hold “Key “ button for 2 seconds and release
when LCD stops blinking.
2. Enter “current password“ and then hold “Key “ button for 2 seconds and
release when LCD stops blinking.
3. Enter “New Password“ with 4 digits on Muti-Entry Panel displaying
“NEW PW : “message.
4. Hold “Key “ button for 2 seconds and release when LCD stops blinking.
5. Repeat “New password“ to confirm it.
6. Hold “Key ”button for 2 seconds and release when LCD stops blinking.
3) Initialization of building password
* All the information of Building Passwords is stored in the Building Distributor.(CCU-BS)
1. Shut off the Building Distributor and open the unit’s case.
2. While pressing “ SW2 “, turn on the Building Distributor and the password will
initialize to “ 4321 “ and the Lamp will blink for 3 seconds.
10. Changing the password
7
1) Press the buttons according to the residence number and then Press “ ”
2) After the residence answers, you can talk with the in-house unit.
3) “Beep” will sound in the cause of a wrong number,
4) “Line Busy” is indicated on the LCD of Multi Entry panel when already talking
with others through the Panel.
- Register residents’ names into the CCU-BS through
“Programming for register residence list ”
- A maximum of 200 names can be registered with up to 18 digits each.
- The name can be strolled through alphabetical order.
1) Press one of [
▼
], [
◀ ▶
], [ ] buttons to display “A” ~ “Z” on LCD to select
resident name that you are looking for..
2)Press [
▼
] to select one of them from “A” to “Z ”, which includes the resident
name that you are looking for.
3)Press [
◀ ▶
] to scroll to resident name section and Press [
▼
] to select
the resident name that you are looking for.
4)Press [ ] to call the residence.
* “Line Busy” is indicated on the LCD of the entry panel when it is connecting with
the same residence.
1) Calling duration lasts for 30 seconds.
2) Talking duration lasts for 60 seconds.
3) Press [
X
] button to end
3. Calling In-house unite by resident Number
4. Calling In-house unite by the listed resident names.
5. Calling / talking duration
