16
2) Wiring
-
Please pay attention to the polarity of the wires. Units will not work properly when mis-wired
- When using a UTP(CAT.5) cable, be sure to check the connection of the color of the wires
as shown in the picture above.
- Within 20m between Build Distributor and Multi Entry Panel, the power is supplied from the
Building Distributor.
- Greater than 20m to less than 100m between Build distributor and Multi entry panel,
the Multi Entry Panel requires separate power source
(In this case, there is no power line connection between the Build Distributor and
the Multi Entry Panel)
- The allotted ID of the Multi Entry Unit should match with the assigned number of
the connection terminal of Building Distributor (CCU-BS)
- When wiring, please use a tool like a screwdriver.
Multi Entry Panel
Build distributor
ID : 1
Terminal 1
ID : 2
Terminal 2
ID : 3
Terminal 3
ID : 4
Terminal 4
1
Warnings and caution
Features
Part names and Functions
Calling In-house unite by resident Number
Calling In-house unite by the listed resident names
Calling / talking duration
Open the entrance with PIN Number
Setting the ID for Multi-Entry Panel
Setting In-House unit aas master and Sub Units
Changing the password
Connectable Products
Resident registration program
Wiring and System Diagram
Specification
2
Table of Contents
4
6
7
7
10
8
9
8
7
11
11
15
17
