background image

14

12) “Completed sending”  message is displayed as above, select (Y).

(When “LOBBY Not connected” message is displayed, please recheck the cable 

connection, the Dip switches of the Building Distributor and “Select No.” & “Select Port”  

in the program menu while shutting off the Building Distributor.

Then select “ Send ” again while the Building Distributor is on.

13) The file of the resident numbers and names stored for Building No.1 is automatically 

saved in the format of AptNo1(e.g.:  Building No. 2 —> AptNo 2.TXT) in the same 

temporary folder.

14) Select “Exit” to quit this program.

15) Select “READ” brings the data from existing information of resident numbers and names 

in the Building Distributor as shown in the image below. 

16) “Name List” appears when selecting “READ” which is then saved into “Name Management” 

by selecting “OK” (But for example, in case there is existing data stored in the temporary 

folder in the format such as “AptNo1.txt” shown above, “Name list” shown below will not 

take priority to be saved over the existing data, “AptNo1.txt”)

If the socket holes are larger
than normal, do not put the
plug.

It may cause an electric shock 
or a fire. 

Make sure that dust or foreign
substances are not gathered
on the product.

Make sure to prevent foreign
substances from entering the
product.

It may cause a breakdown.

Do not put a heavy object on
the product.

It may cause a breakdown.

Do not disassemble or give an
impact to the product.

Avoid direct rays of the sun or
heating devices at a time of
installation.

Install the product in a flat and
stable place.

Otherwise, it may not function 
properly.

Pull the plug if the product is
not used for a long time.

If the product generates strange
sound, make sure to pull the
plug immediately and contact
Commax service center.

Caution

3

Warnings and caution

It indicates prohibition.

It indicates prohibition of disassembly.

It indicates prohibition of contact.

It indicates dos and don’ts. 

It indicates that the plug should be pulled out from the socket.  

Caution 

An injury or property 
losses are expected

Содержание DRC-MSB











Отзывы: