4
1) LCD size : 128x 64 (key pad type)
2) Connecting Door Bell type for an individual door.
3) Connectable to up to 4 units per building
4) Night automatic illumination - white LED illumination (built-in Camera)
5) Manual camera angle control
6) Full duplex
7) Power source DC 24V~ DC28V
●
Multi-Entry Units
With its slim, aluminum case and tempered glass camera lens, the Multi Entry Panel is
resistant to external impact.
It allows visitors to talk with residences list’ for names through the LCD display,
and easily register each residences’ name of each building or assigned area into the
Multi Entry Panel through the keypad or a personal computer.
Various selections are available among Video type with keypad ( DRC-MSC/MSB),
Video type by buttons(DRC-nSC/nSB) and Audio type (DR-nSB) according to clients’ needs.
Using a DRC-MSC (color) entry unit with a black & white videophone unit, as well as
using a DRC-MSB (black & white) entry unit with a color videophone unit, will cause
blurred images.
1. Features
1) Wiring : 8 wires when including a power source ~
Simple installation - all wiring can be used with UTP cable(CAT.5)
2) Connect up to 4 Multi Entry Panels per building
3) Connect up to 4 residences per single Floor distributor (CCU-FS)
4) Connect Multi-Entry Panels with Building distributor (CCU-BS)
5) The power source is required for each Multi Entry Panel.(DC24V or DC-28V according
to the installation distance to Building Distributor.
6) All the in-house units (Color Video Phone, B/W Video Phone or Audio Phone) are
DC source type products and only the Master Unit is supplied with a power source from
the Floor Distributor.(CCU-FS) Additional in-house units need a separate power source,
except for the Audio type in house unit.(AP-5HM)
7) A door Camera unit does not serve as an individual door bell ,but a 2-wire door bell
type is supported for an individual door.
13
8) Enter a resident number and name and then select “ OK ” to enter the next resident
number and name. (can be entered up to 200 resident numbers and names)
9) Select “ Cancel ” to quit
10) In order to edit or delete, select the resident number and name among the existing
list of names as shown above , and Then you can modify through the selection of
“ Modify ”or “ Delete ”.
11) Select “ Send ” to complete and save this information into the Building Distributor.
