●
Priority talk( )
When there is impeding noise that disturbs conversation from the door camera,
pressing and holding the “PTT” button will deliver only the voice of the speaker from
the CDV-71AM to the door camera unit to help clarify speech.
●
Recording visitors image
※
Recording visitors’ image. (Not apply to CCTV) Manual recording Press and hold
the “monitoring” button (REC) for 1 second under “ talk” or “ monitoring” mode to
save a cut of image with electric sound .Auto recording In auto recording mode, a
cut of image is saved every time a visitor push the call button.
(Talk function is available by pressing talk button(
) after finishing auto
recording)
●
Function of icons
display camera 1
display camera 2
display CCTV 1
display CCTV 2
6) CCTV2 (Full screen mode)
a. In case of no CCTV2 signal, switched to standby mode
(In case of jumper pin is set at “CA2_USE”, CAM2 & CCTV2 are not activated.)
●
PIP location settings function
1) This function enables users to set the location of PIP display on the screen.
2) PIP function is activated only when both a door camera and a CCTV camera are
connected to the device.
- During monitoring or talking with a visitor through a door camera, use the “DOWN
BUTTON” as shown below to move the location of PIP in clockwise direction.
7
