6
3-1. Stand-by mode
①
When you turn on the video phone, The LED(Blue) on the bottom of LCD Display will
be turned on. And then you can see a LOGO on the LCD screen, after booting
sound, it will be stand-by mode.
②
You can check model name and version information by pressing DOWN button on
the right for 2 seconds in stand-by mode.
3-2. Operation
(1) To make a call
①
When the visitor press button in stand-by mode from the entrance(door camera),
electronic chime bell rings of video phone and interphone.
And LEDs of (monitor button) and (talk button) blink, the image of the visitor
is shown on the screen in 3 seconds. (If you press menu button, it will be
disconnected and turned into stand-by mode)
②
The screen will be turned on for 30 seconds in stand-by mode and for
communication, it will be turned on for 60 seconds.
③
If you call interphone by pressing (talk button) and push (interphone button)
for 3 seconds, ringtone will come out from interphone and the conversation begins if
you pick up the hand set. Press talk button to end the conversation.
④
In order to call video phone from interphone, pick up the handset of interphone and
press call button. The LED of (interphone button) and (talk button) will blink,
ringtone will come out from the video phone and the image of interphone will also
blink and off on the screen. Then, the (interphone button) and (talk button)
will blink. If you click (interphone button) or (talk button), the conversation
begins. If (interphone button) or (talk button) are not clicked, the monitor will
return to standby mode.)
(2) VOLUME CONTROL (DOWN
UP)
①
Adjust volume of receiver sound with receiver volume control on the side of the
video phone from "small" to "loud" .
②
Adjust volume of ringer volume with ringer volume control on the side of the video
phone from "small" to "loud".
(3) Video format (NTSC/PAL) setting
Video format between both of CCTV and CAMERA should be same.
a) In case of connecting CCTV(NTSC)
Push UP buttons on side at the same time for a few seconds, it will be
changed to NTSC mode.
3. How to use this product
