11
The number of saving files for capacity
Capacity
4 GByte
8 GByte
16 GByte
Captured image
128
128
128
max 100 cuts
max 400 cuts
max 800 cuts
Video time
200 min
400 min
800 min
The number of
Videos
(60 Second)
Micro SDHC Card
(10) Proximity Sensor
- The function which is to record and save image automatically if the sensor is
detected in case of using camera with a built-in proximity sensors.
- If the sensor is detected, image will be recorded and saved automatically, but the
screen does not turn on. (1 captured image/ 30sec video)
- It can detect when the sensor port is changed from HIGH condition (12V-
NORMAL) to LOW condition (0V-sensor detect)
- When the sensor input run during 3 seconds in the LOW condition, Initial sensor
detector is executed. Sensor detector will work again after 1 minute from standby
mode. (When the Electronic album starts, the detect time for re-sensors is
executed as soon as electronic album starting) At this time, count starts in
standby mode only
- SENSOR1 detect
CAM1 automatic recording
If SENSOR2 detect within 1
minute from re-detect of SENSOR 1, CAM 2 recording starts. It is the same vice
versa.
- SENSOR1 and CAM1 (SENSOR2 and CAM2) work together. If you install the
other way, they operate in reverse.
- Please careful that a SENSOR2 can be used only if CAM2 UE pin is in
OPEN(CAM2 ON) condition
- When the fuselage sensor of setup menu is in ENABLE condition, the power
(12V) will be supplied (If the fuselage sensor of setup menu is in DISABLE
condition, the power 12V will be shut off)
- This is operated only in the standby mode. (This work is not operated when other
functions such as menu, call, monitoring and interphone are operated)
- A storage method depends on setting (Video/Still image)
- For recording images, If LED of "recording button" is pause image, LED blinks
once. If it is video, LED blinks at an interval of 500m/s and it record it but LCD is
turned off
- If there is a call from door or interphone, it stop to record image and operate call
function
- When the sensor 2 detects it after detecting the sensor 1, the recording of sensor
1 will be stopped, then the recording of the sensor 2 will be start. And vice versa
- If there is no a SD card, Fuselage sensor does not run
