5
Caution
Please, do not turn on/off, insert or remove Micro SD card during saving, capture image
or recording video. It might be caused of malfunction, harm or damage goods. (User
may lose data in embedded memory and Micro SD card or it may be reason of
malfunction)
• When memorized data exceed capacity of memory in external micro SD card, product
erase automatically delete oldest data because of limitation of embedded memory
capacity. Therefore, we recommend user do back-up data to separate memory.
• Please, check bellow memory spec and use it. We do not guarantee proper operation
and we are not under legal responsibility if user uses other memory which is not
recommended by us. When you insert card please insert until the sounds.
• Recommended spec. of MICRO SD [T-FLASH] Card
(Please, format memory first before use it)
1) Manufacturer : SANDISK
MICRO SD : 2GByte
MICRO SDHC [CLASS 4] : 4 ~ 16GByte
2) Manufacturer : TRANSCEND
MICRO SD : 2GByte
MICRO SDHC [CLASS 4] : 4 ~ 16GByte
• This product has ‘ SUPERCAP inside.
‘SUPERCAP’ is for preventing data lost and damaged in memory if there is
temporarily black out or lost electric power. It turns on embedded clock in period time
when product lost power. Recharging ‘ SUPERCAP’ takes over 30minutes after
turning on power. It can operate embedded clock during approximately 24hours
without external power. If data file is many or size of file is big, embedded clock may
stop within 48hours. Therefore, user must check and set time in product when turning
on product again.
• We recommend check time in product periodically because of time error or difference
time.
• How to insert Micro SD [T-FLASH]
Please, refer to below photo and pay attention to direction when Insert Micro SD card.
When user inserts Micro SD card, please slide card until you feel a ‘ click’
