manualshive.com logo in svg

Commander comset T16, Инструкция по эксплуатации для пользователя

Поделиться
Скачать
Commander comset T16 Скачать руководство пользователя страница 22

Geneml: Opemting Instructions for Users

1.9.5.11

Enquiry and Call Transfer

Enquiry is initiated at (A) by pressing the ‘I’ key followed by the required station’s number

(B). At both these stations, the line LED of the external line flashes slowly.

Call transfer can now take place in the following manner:

(1)

q

 

 

 

8

2

4

Called party (B), hangs up: external call automatically reconnected to the original

 

(2) Calling party (A), hangs up: external call is automatically transferred and connected

to the called party (B)

(3) Either party presses key 

 automatic connection to the external call, other party

receives busy tone

(4) Either party presses key related to that line: as per (3)
(5) Calling party (A), selects another exchange line WITHOUT HANGING 

External call is automatically transferred to the called party (B).

 

Enquiry is initiated by pressing the required station’s number DSS key. As in the case
of internal calls, the called station appears as a flashing signal on all other 
within the system. The line LED of the now held call appears as a flickering signal
at the calling station. At the called station, the line LED of the external line flashes slowly.
Further transfer procedures take place as described above, or additionally by (A) party
pressing the 

 key.

  8 2 4

If the required station is programmed to appear as a DSS position, then enquiry is
initiated by pressing that key. Alternatively, enquiry may be initiated in the same way
as for the standard key station.

 

 

 

8

2

4

0

To conduct an enquiry call, the two-wire station must dial ‘9’ followed by the wanted
station number. The call may be transferred by waiting for the wanted party to respond,
then replacing the handset.
If during the enquiry call, the two-wire party wishes to return to the connection with
the external party, then the two-wire party must dial ‘0’.

l-29

Issue 2

With 

Compliments 

Absolute 

Phone 

& 

Data

Содержание comset T16


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды